forums.nabu.ca

Also works in nabu.run now.

I updated https://nabu.run to v1.2.0. This release supports two new RetroNet commands that DJ added to NABU-LIB and that are required for the latest slideshow to run.

I assume the reason for putting something in an old adaptor box is to avoid the cable tethering it to your computer. IMO, a more flexible approach to put in the box would be an RS422 to ethernet bridge. I'm using this one with my NABU and it works well. Then you can basically run any IA (that suppor...

Leaving this video unlisted to avoid filling my channel with too many of these work-in-progress videos, but folks here might be interested. Here's a prototype of an all-in-one keyboard converter board.

If I load it down with 300mA, it drops to 9v. I'm tempted to measure the current consumption of the keyboard, but at this point I think I'll go back to the actual project that I was in the middle of.

I noticed the MJP technical manual says there's 9V on pin 3 of the keyboard connector, but I measure 12V there. I'm assuming that it's just a mistake in the document, but on the off chance that my NABU is weird or I'm making an error in measurement, I'm curious whether anyone else has checked this v...

For anybody following along, I've put my modified keyboard converter firmware at https://github.com/masto/usbhostcopro/tree/nabu. Specifically, the https://github.com/masto/usbhostcopro/blob/nabu/firmware/NABU.ino.trinket_m0.uf2 is ready to drag-and-drop onto a Trinket M0. It just does basic ASCII, ...

When you don't have a 6-pin DIN connector lying around, you use what you can find... I did put ferrules on the wires for a better fit.

productiondave wrote: ↑Thu Apr 06, 2023 7:34 pm I'm fairly sure the web serial adapter can't save files.

A very true fact. I haven't tried yet, but I suspect this version will be unusable because I don't handle those file commands at all. Something I can look at fixing tonight.

superbenk wrote: ↑Thu Apr 06, 2023 1:02 pm
The point is you don't need to do either of those things. Just loosen the 3 screws, re-center the motor & tighten them down again.

It’s a great point, but too late for this Neanderthal.