Version 2.0

A PCB to sit in the NABU to allow switch between different versions of the available ROMS.
Post Reply
BC2023
Posts: 3
Joined: Sun Apr 02, 2023 12:15 pm

Version 2.0

Post by BC2023 »

Version 2 of the board allows you to switch between banks on 28c256 eeprom using jumpers or switches

Plan is to make a usb ice to enable dev of physical rom on physical machine with a rear panel to switch between the banks
Attachments
F109C438-BC3E-46E4-8871-DC9A13F2BADE.jpeg
BC2023
Posts: 3
Joined: Sun Apr 02, 2023 12:15 pm

Re: Version 2.0

Post by BC2023 »

Currently undergoing testing
User avatar
LeoBinkowski
Posts: 146
Joined: Tue Mar 28, 2023 4:23 pm
Location: nabu.ca
Contact:

Re: Version 2.0

Post by LeoBinkowski »

Oh wow! That does look nice, and very useful too, I bet. Did you make instructions for how to manipulate those jumpers?

Leo
masto
Posts: 39
Joined: Wed Mar 29, 2023 10:15 pm

Re: Version 2.0

Post by masto »

This inspired me to do something extremely lazy.
F8734647-78DE-4E8E-B975-5825DE135D71_1_105_c.jpeg
(Not very visible under there is a row of pin headers with A12 removed)

I did wire it to the CH3/4 switch afterward so I wouldn't have to keep taking the cover off and moving the grabber. I think this will tide me over until your board is done.

ook ook
Post Reply